|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use this Torx ® T8 TR screwdriver to disassemble and reassemble your custom wireless Xbox 360 controller. It has a star-shaped head with a hole that will fit the tamper-resistant screws used in the wireless Xbox 360 controller.
|
This is one of the ultimate mods for your custom Xbox 360 controller, wired or wireless. Replace the standard plastic ABXY buttons with actual 9mm Luger cartridges made of brass with or without nickel plating. The cartridges are safe and are ready to be installed. Being made of metal, they are extremely durable and will hold up to the most rigorous digital marathons of destruction that you can put them through.
|
This is one of the ultimate mods for your custom PS3 controller. Replace the standard plastic triangle, circle, square, X buttons with actual 9mm Luger cartridges made of brass with or without nickel plating. The cartridges are safe and are ready to be installed. Being made of metal, they are extremely durable and will hold up to the most rigorous digital marathons of destruction that you can put them through.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Thummax grips were designed by and made exclusively for TCS. They install easily and can be removed at any time. The simple design allows one to focus on playing without drawing attention to the thumb stick, but still give a secure and confident grip. The soft yet highly durable rubber was carefully selected to fit the role.
|
Made from the softest, most grip enhancing material possible, comes with 10 different colors, and utilizing a design that achieves a level of grip orders of magnitude higher than any other on the market today, Omnigrips™ enable control like you've never experienced before evoking hair-splitting accuracy for every form of virtual battle imaginable.
|
With up to 40 hours of gaming per battery, this 2-pack is ready to fuel some extreme gaming marathons. Enjoy continuous play with one battery while the other is charging so you'll never be left without power. Get the most out of your custom controller.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Recharge your custom Xbox 360 Wireless Controller while you play - and kiss disposable batteries goodbye! Complete with charging cable and rechargeable battery pack, the Xbox 360 Play and Charge Kit is all you need to juice up Controller - even in the midst of battle.
|
If you take your game seriously and want to keep your custom controller in mint condition for best performance or if you have one of our fine custom controllers and want to keep it looking like the world-class piece of art that it is, this airtight, watertight, and crush-proof case is exactly what you need. This case keeps dust and moisture out of your controller and also protects it from scratches, bumps, dropping, or even driving over it with a car.
|
Use this to charge up to 2 rechargeable batteries at the same time. It can charge one battery in 2 hours or 2 batteries in four hours. Simply swap out your dead battery for one fresh off the charge in seconds and never run out of power. Keep your custom controller at full power around the clock.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This kit allows you to convert your own existing Xbox 360 controller into a chrome gold Crown Jewel that will look like it should be sitting in a museum. With a little bit of work, you can have a dazzling custom controller of your own for much cheaper than it would otherwise cost. It comes with a wireless chrome gold back half of the shell. For wired, you will need to use the black or white back half that your controller came with. To install it on a wireless controller, you will need our Torx ® T8 screwdriver. To install it on a wired controller, you will need a small Phillips screwdriver. Please note that this DOES NOT come with a controller. It is only the shell which you install on your own controller.
|
This kit allows you to convert your own existing Xbox 360 controller into a chrome silver Crown Jewel that will look like it should be sitting in a museum. With a little bit of work, you can have a dazzling custom controller of your own for much cheaper than it would otherwise cost. It comes with a wireless chrome silver back half of the shell. For wired, you will need to use the black or white back half that your controller came with. To install it on a wireless controller, you will need our Torx ® T8 screwdriver. To install it on a wired controller, you will need a small Phillips screwdriver. Please note that this DOES NOT come with a controller. It is only the shell which you install on your own controller.
|
With The SteelSeries Spectrum AudioMixer you can connect any PC headset with 3.5mm jacks to the Xbox 360 and enjoy independent audio and voice volume controls. The independent volume controls offer maximum control over what you hear. The independent volume controls offer maximum power over what you hear. You no longer have to waste time muting other players. Since the SteelSeries AudioMixer is attached to your Xbox 360 controller, it is really easy to operate.
|
|
|
